FAQs - Bushings for Leader Pin
What is the difference between DME Bronze-Plated Leader Pin Bushings and DME Self-Lubricating Leader Pin Bushings?
A: The bronze-plated bushings are bronze-plated over steel. The Self-lubricating bushings are made from a Bronze-Aluminum alloy and have oil-impregnated graphite plugs. Both types differ from regular steel bushings by increasing lubricity. The bronze-plating can wear over time on the bronze-plated bushings, while the Bronze-Aluminum alloy used in the Self-Lubricating bushings does not have the same tensile or compressive strength as steel. As such, a good preventative maintenance program is always recommended when using leader pins and bushings, as components can wear over time. This applies to all bushing types, including bronze-plated guided ejection bushings, self-lubricating guided ejection bushings, and regular steel leader pin bushings.
For additional information regarding DME Leader Pin Bushings, please refer to the DME Mold Components Catalog. For other concerns regarding DME Leader Pin Bushings, please contact us by visiting our website at http://www.dme.net, or contact your regional DME sales representative. In the USA or Canada only, please contact DME Customer Service by visiting our website at http://www.dme.net, or call 800-626-6653 (U.S.) or 800-387-6000 (Canada).
