FAQs - Hoist Rings
Where do I find installation or usage information for my DME Hoist Ring?
A: For Inch-type hoist rings offered by DME USA and Canada, the instructions are provided attached to the locating ring. Additional information is stamped onto the locating ring assembly itself. It is recommended not to remove these instructions from the locating ring assembly as improper usage or installation can be dangerous or even fatal.
Installation and usage information for the metric-type hoist rings offered by DME USA and Canada is provided packaged with the hoist ring assembly, and additional information is stamped on the assembly itself. Instructions are defined by the manufacturers of the metric and inch-type hoist rings offered by DME USA and Canada.
WARNING: It is very important to properly follow all instructions provided. Failure to follow the instructions provided with each product can be dangerous and even fatal.
I would like to replace the bolt provided with my DME Hoist Ring. Can I use any bolt?
A: No. You must use the bolt provided with the hoist ring. Replacement bolt kits are offered for both the inch-type and metric-type hoist rings.
WARNING: It is important to use the bolts provided either with the hoist rings or with the proper replacement kit. Failure to comply can be dangerous and even fatal.
How important is position and orientation of my hoist rings in my mold?
A: Very important. Improper position or orientation of the hoist ring can greatly reduce the load carrying limit of the hoist ring. Please refer to the manufacturer’s website for more details on recommendations for hoist ring position and orientation.
For metric-type hoist rings offered by DME USA and Canada, please go to http://www.jergensinc.com
For inch-type hoist rings offered by DME USA and Canada, please go to http://www.americandrillbushing.com.
Note: If you are using DME metric-type hoist rings in North America or South America, it is recommended to use the metric-type hoist rings offered by DME USA and Canada, as shown in the DME Mold Components Catalog. It is also recommended to use hoist rings instead of eye bolts. Eye bolts do not offer the same load carrying limits as hoist rings, particularly when side-mounted relative to the direction of lift.
For additional information regarding Hoist Rings offered by DME USA and Canada, please refer to the DME Mold Components Catalog. For other concerns regarding Hoist Rings offered by DME USA and Canada, please contact us by visiting our website at http://www.dme.net, or contact your regional DME sales representative. In the USA or Canada only, please contact DME Customer Service by visiting our website at http://www.dme.net, or call 800-626-6653 (U.S.) or 800-387-6000 (Canada).
If you have purchased a Hoist Ring offered by DME Europe, please contact your regional DME Sales Representative, or contact DME Europe Customer Service by visiting the DME Europe website at http://www.dmeeu.com.
