Media Page: NPE 2009
--------------------------------------------------------------------------------------------------------------------------------------------------------
2-Stage Ejectors |
 |
DME Serves the Market for More Complex Parts with 2-Stage Ejectors
For Positive, Precise Control of Two-Stage Ejection.
DME Company extended its commitment to be
an essential resource for molders and moldmakers with its 2-Stage Ejectors at NPE 2009. DME
2-State Ejectors adapt to a number of mold base sizes and plate thicknesses and, once installed,
they ensure positive, precise control of the ejection sequence and stroke parameters.
DOWNLOADS:
Image tif 9.3mb
Press Release PDF 44kb | Word 32kb |
back to top
--------------------------------------------------------------------------------------------------------------------------------------------------------
Cold Runner Systems |
 |
DME LSR Cold Decks Bring Dramatic Cycle Time Reduction
to NPE 2009
DME Company features its proven Cold Runner System
designed for molding materials such as Liquid Silicone Rubber (LSR), High Temperature
Vulcanizing (HTV) silicone rubber, and other elastomers. The system offers economic manufacturing and
materials advantages in the processing of these elastomers and enables the leftover sprue to be minimized
and cycle times and setting times to be reduced.
DOWNLOADS:
Image tif 3.2mb
Press Release PDF 112kb | Word 40kb |
back to top
--------------------------------------------------------------------------------------------------------------------------------------------------------
Collapsible Cores |
 |
DME Extends Collapsible Core Product Line
In response to steadily increasing demand, DME
Company has added five new standard sizes to its popular line of Collapsible Cores. The Collapsible Cores allow molders to achieve internal undercuts in a highly
cost-effective manner.
DOWNLOADS:
Image JPG 3.2mb
Press Release PDF 112kb | Word 40kb |
back to top
--------------------------------------------------------------------------------------------------------------------------------------------------------
Eco-Smart for Bioresins |
 |
Eco-Smart Enhanced and Better Than Ever for Bioresin Processing
First introduced to the market at K2007 in its beta test form, DME Company’s Eco-Smart is now commercially available and even more efficient with molding bioresins. DME has been dedicated to product enhancements, ease of application and increased performance for Eco-Smart to better process renewable polymers, including polylactic acid (PLA). Eco-Smart’s application-engineered hot runner nozzle assemblies feature corrosion-resistant components and address the low pressure requirements and cooling issues that PLA users face.
DOWNLOADS:
Image tif 4.7 mb
Press Release PDF 112kb | Word 40kb |
back to top
--------------------------------------------------------------------------------------------------------------------------------------------------------
E-commerce Web Site |
 |
DME Introduces New Ecommerce System
DME Company has launched its new, customer-oriented, e-commerce web site which can be found within the company’s brand new global web site at www.dme.net.
DOWNLOADS:
Image jpg. 396kb
Press Release PDF 55kb | Word 32kb |
back to top
--------------------------------------------------------------------------------------------------------------------------------------------------------
Cashew Gate Insesrts |
 |
Reduce Machining Time and Secondary Operations with Cashew Gate Inserts.
Cashew Gate Inserts are most effective when used in high volume, fast moving, molding applications where the molder needs to avoid the secondary operation of removing gates from
the part. By enabling smaller diameters in the gate area, applications such as flat or thin-walled
parts are also made easier. The “cashew” shaped design connects with a part below the parting
line and, during part ejection, it provides automatic separation of the runner from the part.
DOWNLOADS:
Image tif 3.2mb
Press Release PDF 44kb | Word 32kb |
back to top
--------------------------------------------------------------------------------------------------------------------------------------------------------
Friction Pullers |
 |
DME Company Introduces Friction Puller to Line of Mold Components
DME Company welcomes at NPE (Booth
#W103000 and #S24012) a new addition to its comprehensive line of standard-setting mold
components with the Friction Puller. The Friction Puller is a component designed to provide
optimal parting line mold plate control by using friction at a specified setting to release the mold
plate when the travel limit is achieved.
DOWNLOADS:
Image tiff. 3.7mb
Press Release PDF 44kb | Word 32kb |
back to top
--------------------------------------------------------------------------------------------------------------------------------------------------------
Internal Latch Locks |
 |
Internal Latch Locks Refine Ejection Process for High Volume Molding
DME Company showcased Internal Latch Lock technology which is designed to ensure mold plates are positioned consistently and precisely during processing for applications using stripper plate ejection.
DOWNLOADS:
Image tiff. 2mb
Press Release PDF 44kb | Word 36kb |
back to top
--------------------------------------------------------------------------------------------------------------------------------------------------------
Mold Counters |
 |
CounterView Mold Counters Precisely Monitors Mold Operation, Validates Data
Plastics processors can now proactively monitor
mold activity with the new DME CounterView Mold Counter. Using a non-resettable,
mechanical, 7-digit counter to record the accurate number of mold cycles, the DME
CounterView relies on a sensor that detects when the mold has closed. Each mold cycle triggers
the display to increase or decrease the counting mechanism based on user preference, for precise,
reliable data.
DOWNLOADS:
Image tiff. 3.9mb
Press Release PDF 44kb | Word 32kb |
back to top
--------------------------------------------------------------------------------------------------------------------------------------------------------
Quick Strip Part Ejectors |
 |
DME Quick Strip Eliminates Ejector Pin Marks, Reduces Cycle Time
and Decreases Moldmaking Costs
DME Company unveiled its newest innovation in mold making part ejection, the Quick Strip. This global, standardized off-the-shelf product significantly reduces mold construction time and costs. Since its introduction to the market in late 2008, the Quick Strip has received a great deal of interest from moldmakers and is gaining momentum as the next great innovation in part ejection.
DOWNLOADS:
Image tiff. 1.4mb
Press Release PDF 44kb | Word 32kb |
back to top
--------------------------------------------------------------------------------------------------------------------------------------------------------
Stellar 5000 Hot Runners |
 |
New Stellar Enhancements Give Customers High-Performance Advantage
Over Micromolding Challenges
DME Company has upgraded its popular Stellar 4000 micromolding product line. The 5000 series now offers customers enhancements to the standard format for commodity material applications, and a high performance format for engineering and filled material applications.
DOWNLOADS:
Image tiff. 1mb
Press Release PDF 44kb | Word 32kb |
back to top
--------------------------------------------------------------------------------------------------------------------------------------------------------
Turbo Plastic Baffles |
 |
DME Conducts Turbulent Flow Plastic Baffle Comparison
DME Company spotlighted its new Turbulent Flow Plastic Baffles for faster mold cooling and reduced cycle timesr. The turbulent flow plastic baffles feature a proprietary design that eliminates cooling blow-by and seals the plastic blade of the baffle within the mold’s cooling channels to ensure uniform cooling. The innovative plastic baffle design creates turbulence within the cooling liquid – typically water or oil – serving to increase heat transfer and cool parts more quickly than traditional baffles.
DOWNLOADS:
Image tiff. 1.1mb
Press Release PDF 100kb | Word 32kb |
